No plant claim
Factory history, extrusion capacity, and audit certificates belong to the supplier who issues them. This site does not republish those claims as its own.
DESK SCOPE
LinkScope Sourcing 24
LinkScope Sourcing 24 coordinates cable inquiries for business buyers. The work is to write a construction, find factories willing to quote it, and compare the replies. The desk is an independent sourcing partner. It is not a cable extruder, a distributor with a warehouse, or a carrier.
What the desk does with a cable brief
-
Capture the construction
Conductor, gauge, shield, jacket, impedance, connectors, and the test rows you need. On an RG6-style drop the open rows usually include 75 ohm impedance, an 18 AWG / 1.02 mm center, a frequency range such as 5 MHz to 1000 MHz or 5 MHz to 2150 MHz, attenuation at 50 MHz, 220 MHz, and 550 MHz, return loss and insertion loss at the top frequency, and VSWR when the row is a jumper. Open items stay marked as open so a factory cannot fill them with a family name.
-
Separate the commercial slice
Quantity, destination, timing, currency, and whether a target budget is per meter or for the order. High-end, mid-range, budget, or undecided is recorded as your preference.
-
Ask factories the same packet
Outreach uses your brief. Replies that change the shield, the jacket, or the length basis are logged as deviations instead of being averaged into one price. A 60 percent braid and a quad-shield stack, or a 305 m / 1000 ft reel rate versus a 40 m cut, stay on separate lines with their own attenuation tables in dB per 100 m or dB per 100 ft.
-
Hand the comparison back
You see the named construction, the exclusions, and the documents offered. Acceptance, installation, and code review stay with your team and the supplier you select.
Limits you should expect from this desk
No standing inventory
Inquiry cards and sample photos are not a promise that a reel length is available. Availability is whatever the quoting factory states for that construction.
No compatibility stamp
A matching connector name does not prove return loss on your port. Host gear, splitters, and amplifiers stay outside the cable line unless you add them as separate BOM rows.
Center-metal deviations
A reply that swaps solid copper for copper-clad steel stays on its own row with its own attenuation table. The desk does not average those two constructions. Notes taken from public cabling overviews on 2026-10-27 are question prompts for that row, not results.
No published discount
The desk compares quotations. It does not advertise a percent below a market index. Any sourcing benefit shown on the site has its own eligibility text and is not a cable discount.
Read the inquiry options or go to the form when the construction is ready to send.
Staff on this desk do not sweep cable. They ask the factory for impedance, frequency range, return loss, insertion loss, and, where the drawing says so, VSWR and connector mating cycles. An outdoor connector ingress-protection value stays in the supplier sheet.
Ask the desk to coordinate quotations
The form is the working channel. Put specification, quantity, destination, and delivery timing in the requirement field. Drawings that the form cannot carry can be referenced and sent after the first reply.